Choose the right rigging gear for common lifting setups. This tool helps workers compare sling types, hitch methods and basic lifting requirements before a VOC, toolbox talk or site assessment.
Rigging Gear Selector — Voceed
Tools Suite
Rigging Gear Selector
Lift Study Tool · Dogging & Rigging
Rigging Gear Selector
Step through your lift configuration — legs, lift type, load shape — and instantly see which gear sizes work and full assembly capacity for each.
Step 01 · Load Weight
Load Weight5.0 t
0.1255075100 t
Step 02 · Number of Legs
Step 03 · Lift Type
Step 04 · Load Shape
Step 05 · Included Angle Between Legs
Included Angle60°
1°30°60°90°120°
⚠️ Angle exceeds 120° — Not permitted under AS/NZS. Reduce angle or add lift points.
Step 06 · Sling Type
Configuration Overview
Load: —
Legs: —
Lift Type: —
Shape: —
Hitch RF: —
Angle Factor: —
Sling Tension/Leg: —
Hitch Factor (RF)
—
—
Angle Factor
—
—
Number of Legs
—
Sling Tension Per Leg
—
min WLL required per sling
—
Sling Size / Rating
Sling WLL
SWL
% Capacity Used
OK?
Min Req'd
✓ Gear That Works For This Lift
For planning and education only. All lifts must be verified by a licenced rigger or dogger on site. Verify all WLL markings on physical gear. Does not replace a formal Lift Study, SWP, or SWMS. Data based on AS/NZS 1353, AS 4497, AS 3776, AS 3569 and Bullivants Rigcheck 2025.
